TCG Runner Stainless-steel type, CRS&CPS series
This Cam Rack & Roller Pinion is made of stainless steel exactly taking over the features of Zero-backlash, high accuracy, low friction, low dusting, etc. of TCG Series.
This product has excellent corrosion resistance and anti-rust effect.
TCG Runner Model Calculator Technical InformationHighlights
-
Zero-Backlash
The teeth always mesh via two or three portions and eliminate backlash when rotated in one or another direction.
-
Extended length line and high speed driving
Extendable with use of the connection jig “CJ”. And, capable of high speed driving of 180 m/min or more.
-
High Accuracy
The combination of cam gear and roller pinion makes a positioning accuracy and feeding accuracy (rotation-linearity ratio) as nearly as the ball-screw.
-
Low noise・Low vibration
Rollers of Pinion supported by bearings roll smoothly on the trochoid gear. Thereby tooth striking noise, rotating noise and also vibration are reduced.
-
Low dust
Due to the smooth rotation, the structure dispenses with a least amount of heat and dust generated and cope with a clean room operation.
Model
Roller Pinion
*For the hold-down plate lock bolt, because the tap drill hole is a through hole, there is no specification for bolts with gas-vent hole.
- CPS
- 1
- 1610
- 2
- A
- A
- 4
- A
- 5
- 1.Product Name
- CPS series
- 2.Frame number
-
1610,2010,2510
- 3.Sealed grease
-
A:Standard
G:Supplied grease
*Sealed grease: If G (supplied grease) is selected, please note that the specification values may not be satisfied depending on the properties of the grease.
- 4.Precision cleaning
-
A:No
S:Yes
*Precision cleaning: If S (Yes) is selected: Vacuum packing is done after rust-preventive treatment is provided.
- 5.Lock bolt
-
A:Standard
B:With gas-vent holes
- CPS
- 1
- 3212
- 2
- A
- A
- 4
- A
- 5
- 1.Product Name
- CPS series
- 2.Frame number
-
3212,4012
- 3.Sealed grease
-
A:Standard
G:Supplied grease
*Sealed grease: If G (supplied grease) is selected, please note that the specification values may not be satisfied depending on the properties of the grease.
- 4.Precision cleaning
-
A:No
S:Yes
*Precision cleaning: If S (Yes) is selected: Vacuum packing is done after rust-preventive treatment is provided.
- 5.Lock bolt
-
A:Standard
*Lock bolts are provided only to the standard specifications because gas is released due to the structure of the clamping tool.
Cam Rack
- CRS
- 1
- 1610
- 2
- A
- 1.Product Name
- CRS series
- 2.Frame number
-
1610,2010,2510,3212,4012
- 3.Mounting hole
-
F:Side mount hole only (standard)
Y:+ Tap at bottom surface
- 4.Length of Cam Rack
- For the length of the cam rack,(“Cutting Dimensions of Cam Rack” on P.21.) *Other than the cutting dimensions table are also available. Please contact.
- 5.Precision cleaning
-
1:No (standard)
2:Yes + Standard grease is applied in the packing process. Alvania Grease S2 (Shell Lubricants Japan) is applied.
3:Yes + Supplied grease is applied in the packing process.
*For the reason that the cam rack is made of martensitic stainless steel, the following rust-preventive treatment is provided to all over the surfaces in the packing process.
*Precision cleaning: If Yes is selected: Vacuum packing is done after rust-preventive treatment is provided.
Cam Rack Connection Jig
*The connection jig is shared with CRA and CRC Series.
- CJ
- 1
- 16
- 2
- B
- 1.Product Name
- CJ series
- 2.Frame number
- 16,20,25,32,40
Materials
The materials of the parts used for the products are as follows.
Cam Rack
Martensitic stainless steel
Roller pinion
Pinion body | Austenitic stainless steel |
Hold-down plate | |
Bolt | |
Clamping tool | |
Roller | Martensitic stainless steel |
Oil seal | Nitrile rubber (NBR) |
Connection jig
Carbon steel for structural use
Specifications
ModeItems |
||
---|---|---|
Roller Pinion | ||
Cam Rack |
CPS/CRS series | ||||
---|---|---|---|---|
CPS1610A | CPS2010A | CPS2510A | CPS3212A | CPS4012A |
CRS1610A | CRS2010A | CRS2510A | CRS3212A | CRS4012A |
Common spec. | Basic dynamic rated load | N |
---|---|---|
Maximum working load | N | |
Allowable static rated load | N | |
Basic dynamic rated torque *1 | N・m | |
Maximum working torque *1 | N・m | |
Allowable static rated torque *1 | N・m | |
Displacement distance of pinion per rotation | mm/revolution | |
Max pressure angle | ° | |
Module | mm | |
Roller Pinion | Number of tooth | teeth |
Diameter of pitch circle *2 | mm | |
Mass weight | kg | |
Inertia moment | ×10-4 kg・m2 | |
Cam Rack | Pitch | mm |
Predetermined length | mm | |
Number of tooth | teeth | |
Mass weight | kg | |
Outline Drawing | Roller pinion / Cam Rack | |
Connection Jig | ||
CAD Data | ||
Catalog | ||
Instruction Manual |
1000 | 1500 | 2200 | 3600 | 6000 |
1700 | 2200 | 3100 | 6600 | 9000 |
2000 | 3000 | 4400 | 7200 | 10940 |
25.5 | 47.7 | 87.5 | 220.0 | 458.4 |
43.3 | 70.1 | 123.4 | 403.3 | 687.6 |
59.9 | 95.5 | 175.1 | 440.0 | 836.0 |
160 | 200 | 250 | 384 | 480 |
30.7 | 30.1 | 30.7 | 30.1 | 30.0 |
4.75 | 6 | 7.5 | 9.5 | 12 |
10 | 10 | 10 | 12 | 12 |
50.9 | 63.7 | 79.6 | 122.2 | 152.8 |
0.81 | 1.5 | 2.4 | 6.8 | 16 |
4.56 | 12.5 | 29.6 | 200 | 728 |
16 | 20 | 25 | 32 | 40 |
992 | 1000 | 1000 | 992 | 1000 |
62 | 50 | 40 | 31 | 25 |
2.2 | 4.1 | 5.4 | 8.3 |
13 |
*1 Basic dynamic rated torque (maximum working torque, allowable static rated torque) is torque observed when applying basic dynamic rated load (maximum working load, allowable static rated load) to roller pinion along diameter formed by pitch circle
*2 The indicated pitch circle diameter values are theoretical, not representing the actual pitch circle diameters of the respective roller pinions
TCG (Trochoid Cam Gear) Line-up
-
TCG Runner,
CRA&CPA / CRC&CPC series- Frame number
-
CRA&CPA:1010,210,1610,2010,2510,3212
CRC&CPC:3212,4012
- Maximum working load(N)
-
CRA&CPA:250 - 6600
CRC&CPC:10500 - 18000
-
Precision Ball Reducers
for TCG Series 1210-2510, SFP Series- Frame number
- 70,85,100,125
- Reduction ratio
- 8 - 50
- Acceleration peak torque(N・m)
- 9.5 - 123.4
-
Precision Differential Reducers
for TCG Series 3212-4012, NSP Series- Frame number
- 70,85,100,125
- Reduction ratio
- 8-50
- Acceleration peak torque(N・m)
- 9.5-123.4
-
TCG Ring(Full Ring),
RGF&CPA / RFC&CPC series- Frame number
-
RGF&CPA:1010,1210,1610,2510,3212
RFC&CPC:3212,4012
- Maximum working torque(N・m)
-
RGF&CPA:11 - 1930
RFC&CPC:1800 - 5300
-
TCG Ring(Circular Arc Ring),
RGD&CPA / RDC&CPC series- Frame number
-
RGD&CPA:1610,2510,3212
RDC&CPC:3212,4012
- Maximum working torque(N・m)
-
RGD&CPA:585 - 6430
RDC&CPC:3800 - 17500
-
TCG Ring Internal-gear type
(Full Ring),UGF&CPA/UFC&CPC Series- Frame number
-
UGF&CPA:1610,2510,3212
UFC&CPC:3212,4012
- Maximum working torque(N・m)
-
UGF&CPA:245-1550
UFC&CPC:2460-3990
-
TCG Ring Internal-gear type
(Circular Arc Ring),UGD&CPA/UDC&CPC series- Frame number
-
UGD&CPA:1610,2510,3212
UDC&CPC:3212,4012
- Maximum working torque(N・m)
-
UGD&CPA:535-9600
UDC&CPC:6910-32000
-
Full Ring Unit
RGU series- Frame number
- 1610,2510
- Reduction ratio
- 40 - 625
- Maximum working torque(N・m)
- 143 - 1496
-
Circular Arc Ring Unit
RGU series- Frame number
- 1610,2510
- Reduction ratio
- 150 - 1200
- Maximum working torque(N・m)
- 945 - 2270